RM57L843BZWTT Купить - TI Микроконтроллер

Картинки только для справки.Точные характеристики следует получить из паспорта продукта.

RM57L843BZWTT

MCU 32Bit ARM Cortex R5F RISC 4Mb Flash 1.2V/3.3V Automotive 337Pin NFBGA

Наличие: 1,246 шт. Гарантия оригинала

Адрес доставки: Москва

Цена: ₽ 6,844.08

шт.

Купить

Цена действительна 24 часа

Высокий спрос на этой неделе

Производитель:

ЧипСити Номер продукта:

CC12653446

Категория продукта:

Микроконтроллер

Дата доставки: 7 дней

3D модель

Оплата:

Обновлено 01.05.2026, 07:48:07(GMT+3)

Проверка качества компонентов

тдел качества компонентов ЧипСити поддерживает вышеупомянутые многочисленные методы проверки, чтобы гарантировать качество компонентов. Узнать больше >

Более 11 лет опыта в закупках

Сертифицированный поставщик (ISO)

1000+ клиентов в России

Поддержка малого MOQ

RM57L843BZWTT характеристики

Атрибут	Значение атрибута
Номенклатура	RM57L843BZWTT
Производитель	TI
ЧипСити Номер продукта	CC12653446
Жизненный Цикл Продукта	Active
Категория продукта	Микроконтроллер
Даташит
3D модель	3D модель
Количество Выводов	337 Pin
Корпус/Пакет	BGA-337
Частота	330 MHz
Тактовая Частота	330 MHz
Размер ОЗУ	512 KB
Размер Флэш-памяти	4194304 B
Количество УАПП	4 UART
Количество АЦП	2 ADC
Рабочая температура (Макс)	105 ℃
Рабочая температура (мин)	-40 ℃
Рабочая Температура	-40℃ ~ 105℃ (TA)
RoHS Комплаенс	RoHS Compliant
Бессвинцовая Статус
	Показывать Просмотр аналоги замена

RM57L843BZWTT описание продукта

The RM57L843 device is part of the Hercules RM series of high-performance ARM® Cortex®-R-based MCUs. Comprehensive documentation, tools, and software are available to assist in the development of IEC 61508 functional safety applications. Start evaluating today with the Hercules RM57x LaunchPad Development Kit. The RM57L843 device has on-chip diagnostic features including: dual CPUs in lockstep, Built-In Self-Test (BIST) logic for CPU, the N2HET coprocessors, and for on-chip SRAMs; ECC protection on the L1 caches, L2 flash, and SRAM memories. The device also supports ECC or parity protection on peripheral memories and loopback capability on peripheral I/Os.
The RM57L843 device integrates two ARM Cortex-R5F floating-point CPUs, operating in lockstep, which offer an efficient 1.66 DMIPS/MHz, and can run up to 330 MHz providing up to 547 DMIPS. The device supports the little-endian [LE] format.
The RM57L843 device has 4MB of integrated flash and 512KB of data RAM with single-bit error correction and double-bit error detection. The flash memory on this device is a nonvolatile, electrically erasable and programmable memory, implemented with a 64-bit-wide data bus interface. The flash operates on a 3.3-V supply input (the same level as the I/O supply) for all read, program, and erase operations. The SRAM supports read and write accesses in byte, halfword, and word modes.
The RM57L843 device features peripherals for real-time control-based applications, including two Next Generation High-End Timer (N2HET) timing coprocessors with up to 64 total I/O terminals.
The N2HET is an advanced intelligent timer that provides sophisticated timing functions for real-time applications. The timer is software-controlled, with a specialized timer micromachine and an attached I/O port. The N2HET can be used for pulse-width-modulated outputs, capture or compare inputs, or GPIO. The N2HET is especially well suited for applications requiring multiple sensor information or drive actuators with complex and accurate time pulses. The High-End Timer Transfer Unit (HTU) can perform DMA-type transactions to transfer N2HET data to or from main memory. A Memory Protection Unit (MPU) is built into the HTU.
The Enhanced Pulse Width Modulator (ePWM) module can generate complex pulse width waveforms with minimal CPU overhead or intervention. The ePWM is easy to use and supports both high-side and low-side PWM and deadband generation. With integrated trip zone protection and synchronization with the on-chip MibADC, the ePWM is ideal for digital motor control applications.
The Enhanced Capture (eCAP) module is essential in systems where the accurately timed capture of external events is important. The eCAP can also be used to monitor the ePWM outputs or for simple PWM generation when not needed for capture applications.
The Enhanced Quadrature Encoder Pulse (eQEP) module directly interfaces with a linear or rotary incremental encoder to get position, direction, and speed information from a rotating machine as used in high-performance motion and position-control systems.
The device has two 12-bit-resolution MibADCs with 41 total channels and 64 words of parity-protected buffer RAM. The MibADC channels can be converted individually or by group for special conversion sequences. Sixteen channels are shared between the two MibADCs. Each MibADC supports three separate groupings. Each sequence can be converted once when triggered or configured for continuous conversion mode. The MibADC has a 10-bit mode for use when compatibility with older devices or faster conversion time is desired. One of the channels in MibADC1 and two of the channels in MibADC2 can be used to convert temperature measurements from the three on-chip temperature sensors.
The device has multiple communication interfaces: Five MibSPIs; four UART (SCI) interfaces, two with LIN support; four CANs; two I2C modules; and one Ethernet controller. The SPI provides a convenient method of serial interaction for high-speed communications between similar shift-register type devices. The LIN supports the Local Interconnect standard (LIN 2.1) and can be used as a UART in full-duplex mode using the standard Non-Return-to-Zero (NRZ) format. The DCAN supports the CAN 2.0B protocol standard and uses a serial, multimaster communication protocol that efficiently supports distributed real-time control with robust communication rates of up to 1 Mbps. The DCAN is ideal for applications operating in noisy and harsh environments (for example, automotive and industrial fields) that require reliable serial communication or multiplexed wiring. The Ethernet module supports MII, RMII, and Management Data I/O (MDIO) interfaces. The I2C module is a multimaster communication module providing an interface between the microcontroller and an I2C-compatible device through the I2C serial bus. The I2C module supports speeds of 100 and 400 kbps.
The Frequency-Modulated Phase-Locked Loop (FMPLL) clock module multiplies the external frequency reference to a higher frequency for internal use. The Global Clock Module (GCM) manages the mapping between the available clock sources and the internal device clock domains.
The device also has two External Clock Prescaler (ECP) modules. When enabled, the ECPs output a continuous external clock on the ECLK1 and ECLK2 balls. The ECLK frequency is a user-programmable ratio of the peripheral interface clock (VCLK) frequency. This low-frequency output can be monitored externally as an indicator of the device operating frequency.
The Direct Memory Access (DMA) controller has 32 channels, 48 peripheral requests, and ECC protection on its memory. An MPU is built into the DMA to protect memory against erroneous transfers.
The Error Signaling Module (ESM) monitors on-chip device errors and determines whether an interrupt or external Error pin/ball (nERROR) is triggered when a fault is detected. The nERROR signal can be monitored externally as an indicator of a fault condition in the microcontroller.
The External Memory Interface (EMIF) provides a memory extension to asynchronous and synchronous memories or other slave devices.
A Parameter Overlay Module (POM) is included to enhance the debugging capabilities of application code. The POM can reroute flash accesses to internal RAM or to the EMIF, thus avoiding the reprogramming steps necessary for parameter updates in flash. This capability is particularly helpful during real-time system calibration cycles.
Several interfaces are implemented to enhance the debugging capabilities of application code. In addition to the built-in ARM Cortex-R5F CoreSight debug features, the Embedded Cross Trigger (ECT) supports the interaction and synchronization of multiple triggering events within the SoC. An External Trace Macrocell (ETM) provides instruction and data trace of program execution. For instrumentation purposes, a RAM Trace Port (RTP) module is implemented to support high-speed tracing of RAM and peripheral accesses by the CPU or any other master. A Data Modification Module (DMM) gives the ability to write external data into the device memory. Both the RTP and DMM have no or minimal impact on the program execution time of the application code.
With integrated safety features and a wide choice of communication and control peripherals, the RM57L843 device is an ideal solution for high-performance real-time control applications with safety-critical View datasheet View product folder

Показывать

RM57L843BZWTT Даташит PDF

222 страницы, 9244 КБ

07/08/2016

просматривать

RM57L843BZWTT Справочное руководство пользователя

1913 страницы, 12578 КБ

05/19/2014

просматривать

RM57L843BZWTT Справочное руководство пользователя

1913 страницы, 12578 КБ

05/19/2014

просматривать

RM57L843BZWTT Другие Даташит

60 страницы, 221 КБ

05/31/2016

просматривать

RM57L843BZWTT Другие Даташит

60 страницы, 221 КБ

05/31/2016

просматривать

RM57L843BZWTT Другие Даташит

43 страницы, 186 КБ

05/31/2016

просматривать

RM57L843BZWTT Другие Даташит

2 страницы, 68 КБ

09/27/2011

просматривать

Поиск деталей онлайн

Обновлено 2026/05/01 07:34:36(GMT+3)

Мы поддерживаем денежные переводы из различных банков.Если у вас есть другие потребности в оплате, вы можете связаться с менеджером по продажам. Клиент несет ответственность за расходы по доставке.
- Вы можете выбрать, будет ли стоимость доставки взиматься через ваш счет доставки или нами.

- Пожалуйста, заранее уточните у логистической компании стоимость доставки в отдаленные районы.

- (За доставку в эти районы может взиматься дополнительная плата ($35-$50)).

- Срок доставки: обычно от 2 до 7 рабочих дней.

- Номер для отслеживания будет выслан после отправки заказа.
- Тщательно проверено и упаковано на складе ChipCity

- Вакуумная упаковка

- Антистатическая упаковка

- Ударопрочный пенопласт
- Данные условия носят справочный характер, фактические условия зависят от предложения продавца.

- Пожалуйста, уточняйте технические характеристики продукции при заказе.

- MOQ - минимальное количество заказа, необходимое для приобретения каждой детали.

- Если у вас есть особые инструкции по заказу, пожалуйста, укажите их на странице заказа.

- При заказе будет использоваться предотгрузочная инспекция (PSI).
- Входной контроль качества (IQC), 1000+ квалифицированных дилеров.

- Чипы тестируются авторитетными организациями, чтобы гарантировать качество, подлинность и безопасность вашего устройства.

- Контроль декапсуляции

- Рентгеновский контроль

- рентгенографический контроль

- Электрическое тестирование

- тестирование поверхности

- Склад цифровых компонентов, занимающий площадь 800 квадратных метров, с постоянной температурой и влажностью

Узнать больше >

Рекомендуемые детали
Горячие детали
Популярные детали
Недавно популярные детали

SN:H1.98131LO32210V74Q0QC0S0