LPC11C14FBD48 Купить - NXP Микроконтроллер

Картинки только для справки.Точные характеристики следует получить из паспорта продукта.

LPC11C14FBD48

NXP

MCU 32Bit LPC11C00 ARM Cortex M0 RISC 32KB Flash 3.3V 48Pin LQFP

Наличие: 6,284 шт. Гарантия оригинала

Адрес доставки: Москва

Цена: ₽ 356.74

шт.

Купить

Цена действительна 24 часа

Высокий спрос на этой неделе

Производитель:

NXP

ЧипСити Номер продукта:

CC229174696

Категория продукта:

Микроконтроллер

Дата доставки: 7 дней

3D модель

Оплата:

Обновлено 01.05.2026, 07:48:07(GMT+3)

Проверка качества компонентов

тдел качества компонентов ЧипСити поддерживает вышеупомянутые многочисленные методы проверки, чтобы гарантировать качество компонентов. Узнать больше >

Более 11 лет опыта в закупках

Сертифицированный поставщик (ISO)

1000+ клиентов в России

Поддержка малого MOQ

LPC11C14FBD48 характеристики

Атрибут	Значение атрибута
Номенклатура	LPC11C14FBD48
Производитель	NXP
ЧипСити Номер продукта	CC229174696
Жизненный Цикл Продукта	Active
Категория продукта	Микроконтроллер
Даташит
3D модель	3D модель
Количество Выводов	48 Pin
Корпус/Пакет	LQFP-48
Напряжение Питания (DC)	1.80V (min)
Тактовая Частота	50.0 MHz
Размер ОЗУ	8192 B
RoHS Комплаенс	RoHS Compliant
Бессвинцовая Статус	Lead Free
REACH SVHC Комплаенс	No SVHC
	Показывать Просмотр аналоги замена

Аналоги товара

LPC11C14FBD48 описание продукта

Overview
The LPC11C14FBD48 is an ARM Cortex-M0 microcontroller designed for 8/16-bit microcontroller applications, offering performance, low power, simple instruction set and memory addressing together with reduced code size compared to existing 8/16-bit architectures. The peripheral complement of the LPC11C14FBD48 includes 32 kB of flash memory, 8 kB of data memory, one C_CAN controller, one Fast-mode Plus I²C-bus interface, one RS-485/EIA-485 UART, two SPI interfaces with SSP features, four general purpose counter/timers, a 10-bit ADC, and 40 general purpose I/O pins. On-chip C_CAN drivers and flash In-System Programming tools via C_CAN are included.
MoreLess
## Features
* System:
* ARM Cortex-M0 processor, running at frequencies of up to 50 MHz
* ARM Cortex-M0 built-in Nested Vectored Interrupt Controller (NVIC)
* Serial Wire Debug
* System tick timer
* Memory:
* 32 kB on-chip flash program memory
* 8 kB SRAM data memory
* In-System Programming (ISP) and In-Application Programming (IAP) via on-chip bootloader software
* Flash ISP commands can be issued via UART or C_CAN
* Digital peripherals:
* 40 General Purpose I/O (GPIO) pins with configurable pull-up/-down resistors
* GPIO pins can be used as edge and level sensitive interrupt sources
* High-current output driver (20 mA) on one pin
* High-current sink drivers (20 mA) on two I²C-bus pins in Fast-mode Plus
* Four general purpose counter/timers with 4 capture inputs and 13 match outputs
* Programmable WatchDog Timer (WDT)
* Analog peripherals:
* 10-bit ADC with input multiplexing among 8 pins
* Serial interfaces:
* UART with fractional baud rate generation, internal FIFO, and RS-485 support
* Two SPI controllers with SSP features and with FIFO and multi-protocol capabilities
* I²C-bus interface supporting full I²C-bus specification and Fast-mode Plus with a data rate of 1 Mbit/s with multiple address recognition and monitor mode
* C_CAN controller. On-chip C_CAN and CANopen drivers included
* Clock generation:
* 12 MHz internal RC oscillator trimmed to 1 % accuracy that can optionally be used as a system clock
* Crystal oscillator with an operating range of 1 MHz to 25 MHz
* Programmable watchdog oscillator with a frequency range of 7.8 kHz to 1.8 MHz
* PLL allows CPU operation up to the maximum CPU rate without the need for a high-frequency crystal. May be run from the system oscillator or the internal RC oscillator
* Clock output function with divider that can reflect the system oscillator, IRC, CPU clock, or the Watchdog clock
* Power control:
* Integrated PMU (Power Management Unit) to minimize power consumption during Sleep, Deep-sleep, and Deep power-down modes
* Three reduced power modes: Sleep, Deep-sleep, and Deep power-down
* Processor wake-up from Deep-sleep mode via a dedicated start logic using 13 of the GPIO pins
* Power-On Reset (POR).
* Brownout detect with four separate thresholds for interrupt and forced reset
* Unique device serial number for identification
* Single 3.3 V power supply (1.8 V to 3.6 V)
* Available as 48-pin LQFP package
## Target Applications
* eMetering
* Elevator systems
* Industrial and sensor based networks
* White goods
## Features

Показывать

LPC11C14FBD48 Даташит PDF

11 страницы, 112 КБ

02/03/2010